Topfield TF4000PVR User Manual download pdf (Page 57)

58

TROUBLESHOOTING (Q & A)

Problem Possible Causes What to do

Nothing appears on the

Front Panel.

No sound or picture, but

the front panel shows the

time or -- : --

No Picture, No Sound.

The Remote Control Unit

(RCU) is not working.

Time Setting is wrong.

2 broadcasts overlap.

The CAM is not working.

Black Screen.

The main power cable

is not connected.

PVR is in standby mode.

The satellite dish is not

pointing at the satellite.

No Signal or Weak Signal.

LNB is faulty.

The UHF Button is

pushed down .

No Batteries.

The RCU is incorrectly

aimed.

The PVR is in standby

mode.

The Time is not set properly.

The channels are not

configured properly on the

RF mode.

The CAM is not installed

properly.

Check that the main power

cable is plugged into the power

socket.

Turn the power ON.

Adjust the dish.

Check the settings in one of

the channel search submenus.

Check the cable connections.

Replace the LNB.

Get out of the UHF mode.

Change the batteries (both).

Aim the RCU properly to

the PVR.

Change the mode to the

normal mode.

Adjust the Time on the Menu.

You have forgotten your

secret PIN Code.

Contact your Service Provider.

Set the channels in the RF mode

under the A/V setting of the

Menu between 21 to 69 on the TV.

Check that the CAM has been

correctly inserted.

The CAM is not working

correctly.

Eject the CAM and reinsert

it again.

1 2 ... 52 53 54 55 56 57 58 59

Comments to this Manuals

No comments