Topfield TF4000PVR User Manual download pdf (Page 13)

GETTING STARTED

Press the Power button to operate the PVR from the STANDBY mode. Now, the

Info Box will appear for a given time and disappear. By pressing the button, the Info

Box will remain on the screen. The display time of the Info Box is adjustable under the

Installationmenu of the Mainmenu.

If the current broadcast has EPG (Electronic Program Guide) with it, press the

button to see not only the current channel’s but also other channel’s EPG without

any time constraints. Also, press button to reserve and save the current service

and to watch the broadcast automatically when it starts.

IMPORTANT: Before taking charge of your new PVR, some important technical

settings are essential.

- First, press the MENU( ) button on the RCU to make the MainMenu appear.

- Go to the LNB Settingmenu under the Channel Searchitem of the

Installation menu and press button.

- The default PIN CODE is 0000.

- Choose the right parameters for Satellite Name, LNB Frequency, 22KHz, 12 V,

DiSEqC 1.0, and Motorized System according to your LNB and satellite settings.

If the right Satellite Name and LNB Frequency were not found in the list, call the

dealer for satellite information.

- Then, press the MENU( ) button and go back to the Channel Search

menu.

- Set the Search Modeto the Automode. (A Manualor Advanced Search

can always be performed later on)

- Select the Start Search...item and press button.

- The search procedure will take a while. Press button when the searching

process is over (100%) to confirm and save the new channel list.

- For further information, please refer to the LNB Settingitem of the MENU

OPERATIONS on this manual.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 58 59

No comments

Topfield TF4000PVR User Manual Page 13